5. Other
5.3.14
Paper pick-up unit
1. Remove the rear cover.
See P.31
2. Remove the right cover.
See P.33
3. Remove the left cover.
See P.32
4. Remove the high voltage unit and shield.
See the removal procedure steps 1 to 2 of "Tray1 paper pick-up solenoid" on p.63
5. Remove the rack drive assy.
See the removal procedure steps 1 to 3 of "Developing motor" on p.62
[1]
[1]
58
[3]
[2]
4139fs2077c1
[1]
A00VF2C582DA
Field Service Ver. 1.0 Aug. 2006
6. Remove the ventilation fan motor.
See P.61
7. Remove the screw [1], unlock two
tabs [2] and remove the ventilation
fan duct [3].
8. Lay the main body of the printer on
its back.
9. Remove five screws [1].