13. SERVICE PERSON mode (magicolor 2530 DL)
13.3.2
SERVICE PERSON SRU USAGE
Function
• Displays the remaining life of the transfer belt, transfer roller, and fusing unit.
Use
• To check the remaining life of the maintenance service parts.
Setting
1. Enter the SERVICE/SERVICE PERSON mode.
/procedure
2. Select [SERVICE PERSON SRU USAGE] and press the Menu Select key.
3. Select the desired unit using the right and left arrow keys.
13.3.3
RESET CONTROLLER
Function
• Resets the controller.
Use
• To return the controller to its initial condition.
Setting
1. Enter the SERVICE/SERVICE PERSON mode.
/procedure
2. Select [RESET CONTROLLER] and press the Menu Select key.
3. This automatically restarts the machine and the initial screen reappears.
13.3.4
RESET COUNTER TRANSFER BELT
Function
• Resets the counter value of the transfer belt unit.
Use
• To reset the transfer belt unit counter after the transfer belt unit is replaced.
Setting
1. Enter the SERVICE/SERVICE PERSON mode.
/procedure
2. Select [RESET COUNTER TRANSFER BELT UNIT] and press the Menu Select key.
3. This resets the counter and the ENGINE/SERVICE menu reappears.
13.3.5
RESET COUNTER FUSER UNIT
Function
• Resets the counter value of the fusing unit.
Use
• To reset the fusing unit counter after the fusing unit is replaced.
Setting
1. Enter the SERVICE/SERVICE PERSON mode.
/procedure
2. Select [RESET COUNTER FUSER UNIT] and press the Menu Select key.
3. This resets the counter and the ENGINE/SERVICE menu reappears.
13.3.6
RESET COUNTER TRANSFER ROLLER
Function
• Resets the counter value of the transfer roller.
Use
• To reset the transfer roller counter after the transfer roller is replaced.
Setting
1. Enter the SERVICE/SERVICE PERSON mode.
/procedure
2. Select [RESET COUNTER TRANSFER ROLLER] and press the Menu Select key.
3. This resets the counter and the ENGINE/SERVICE menu reappears.
128
Field Service Ver. 1.0 Aug. 2006