Torque Limiter - Konica Minolta magicolor 2500W Service Manual

5. Other
5.3.28

Torque limiter

[2]
[1]
[2]
68
[1]
4139fs2512c0
4139fs2513c0
[1]
A00VF2C513DA
[1]
A00VF2C514DA
Field Service Ver. 1.0 Aug. 2006
A. Removal procedure
1. Remove the paper pick-up unit.
See P.58
2. Remove the screw [1] and the paper
pick-up clutch.
3. Disassemble the paper pick-up
clutch and remove the torque limiter
[2].
B. Reinstallation procedure
NOTE
• There are five slots provided in the
coupling gear [1] of the paper pick-
up clutch. These slots are for
adjusting the position of the pick-
up roller.
When the torque limiter [2] is rein-
stalled, it is necessary to adjust the
position of the coupling gear [1]
and torque limiter [2] so that any
paper take-up failure can be pre-
vented.
1. Install the paper pick-up clutch [1].
2. Turn the paper pick-up clutch [1] in
the direction of the arrow shown on
the left until it is engaged with the
solenoid and stopped.
3. If the pick-up roller [1] tilts in the
clockwise direction, turn the coupling
gear of the paper pick-up clutch in
the direction of A and reassemble
the paper pick-up clutch.