Settings/Adjustments In Service Menu Functions; Sru - Konica Minolta magicolor 2500W Service Manual

14. SERVICE MENU (magicolor 2550/magicolor 2550DN)

14.3 Settings/adjustments in SERVICE MENU functions

14.3.1

SRU

A. TRANSFER BELT
Function • Resets the counter value of the transfer belt unit.
Use • To reset the transfer belt unit counter when the transfer belt unit is replaced.
Setting 1. Enter the SERVICE MENU.
/procedure P.129
2. Select [SRU] and press the Menu Select key.
3. Select [TRANSFER BELT] and press the Menu Select key.
4. Select [YES] and press the Menu Select key.
5. This resets the counter and the [SERVICE MENU] reappears.
B. FUSER UNIT
Function • Resets the counter value of the fusing unit.
Use • To reset the fusing unit counter when the fusing unit is replaced.
Setting 1. Enter the SERVICE MENU.
/procedure P.129
2. Select [SRU] and press the Menu Select key.
3. Select [FUSER UNIT] and press the Menu Select key.
4. Select [YES] and press the Menu Select key.
5. This resets the counter and the [SERVICE MENU] reappears.
C. TRANSFER ROLLER
Function • Resets the counter value of the transfer roller.
Use • To reset the transfer roller counter when the transfer roller is replaced.
Setting 1. Enter the SERVICE MENU.
/procedure P.129
2. Select [SRU] and press the Menu Select key.
3. Select [TRANSFER ROLLER] and press the Menu Select key.
4. Select [YES] and press the Menu Select key.
5. This resets the counter and the [SERVICE MENU] reappears.
D. REMOVE ALL
Function • Moves each color toner cartridge to the appropriate replacement position, one by
one, to allow all of the toner cartridges to be removed.
Use • To allow all of the toner cartridges to be removed.
Setting 1. Enter the SERVICE MENU.
/procedure P.129
2. Select [SRU] and press the Menu Select key.
3. Select [REMOVE ALL] and press the Menu Select key.
4. The rack rotates to bring the first color toner cartridge to the replacement position.
when the rack stops moving, the message [OPEN DOOR/REMOVE TONER C]
appears on the display.
5. Open the top cover and remove the toner cartridge.
6. Close the top cover. Message [CHECKING TONER, PLEASE WAIT...] appears.
Then, the message [OPEN DOOR/REMOVE TONER K] appears on the display.
7. Repeating the same steps, remove all toner cartridges.
NOTE
• The toner cartridges are to be removed in the order of C → K → Y → M.
8. Close the top cover. The initial screen will then reappear.
130
Field Service Ver. 1.0 Aug. 2006