Interface Menu; Ethernet - Konica Minolta magicolor 2500W Service Manual

11. MENU (magicolor 2550/magicolor 2550DN)

11.7 INTERFACE MENU

11.7.1

ETHERNET

A. TCP/IP
(1) ENABLE
Function • Sets whether to enable or disable TCP/IP.
Use • To disable TCP/IP.
Setting • The default setting is YES.
/procedure
(2) DHCP/BOOTP
Function • Automatically acquires an IP address from the DHCP or BOOTP server, if there is
one in the network, and specifies whether to load other network information.
Use • To automatically acquire an IP address and load other network information.
Setting • The default setting is YES.
/procedure
(3) IP ADDRESS
Function • Sets the IP address of the printer on the network.
Use • To enter the printer's IP address.
Setting • Enter the [IP ADDRESS] using the
/procedure • The default setting is "192.168.1.2."
NOTE
• When the printer's IP address is set manually, DHCP/BOOTP is automatically
set to OFF.
(4) DEFAULT ROUTER
Function • Sets the IP address of the router if one is on the network.
Use • To enter the IP address of the router.
Setting • Enter the IP address using the
/procedure • The default setting is "000.000.000.000".
(5) SUBNET MASK
Function • Sets the subnet mask of the printer used on the network.
Use • To enter the printer subnet mask.
Setting • Enter the subnet mask using the
/procedure • The default setting is "000.000.000.000".
112
"YES"
"YES"
, ,
, , , and
, ,
Field Service Ver. 1.0 Aug. 2006
NO
NO
, and arrow keys.
arrow keys.
, and arrow keys.