Field Service Ver. 1.0 Aug. 2006
10.2 List of control panel messages
10.2.1
Standard status messages
• Normal state messages are displayed on the upper line of the LCD.
Message
IDLE
PROCESSING
PRINTING
WARMING UP
CALIBRATING
ENERGY SAVER
CANCELLING JOB
COPYING
(XXX/XXX)
PRINTING
(XXX/XXX)
FIRMWARE UPDATE
WRITING IMAGE
INITIALIZING
MAGICOLOR 2550
STARTING SYSTEM
10.2.2
Caution messages
Message
CANNOT ROTATE
CARTRIDGE
DISK NEAR FULL
X EMPTY
X INCORRECT
X TONER LOW
OPC DRUM LOW
OPC DRUM OUT
TRAY 2 OPEN
(When the Ready
indicator is lit)
MEDIA MISMATCH
10. Description of the control panel (magicolor 2550/magi-
• Ready to print.
• Processing data.
• Printing.
• Warming up.
• Calibrating.
Whenever you replace a toner cartridge or reboot the printer after making an
environmental change, the printer automatically pauses to do an automatic
image density control (AIDC) cycle. This process is provided to make reliable
printer operation with optimum output quality possible.
• Energy saver mode.
• Canceling a job.
• The machine is copying with the collating function.
• The machine is printing with the collating function.
• The firmware is being updated.
• The printer is being initialized.
• The printer is starting up.
• A problem occurred while the toner cartridge carousel was rotating.
• The hard disk is nearly full.
• The specified color of toner cartridge is empty.
NOTE
• Appears when [QUALITY MENU] → [TONER OUT ACTION] is set to
[CONTINUE].
• The specified color of toner cartridge is not a genuine KONICAMINOLTA
toner cartridge or not the correct type.
• The specified color of toner cartridge is low and should be replaced within
200 pages at 5% coverage of Letter/A4 pages.
• The drum cartridge will soon run out.
• The drum cartridge is empty.
• Tray 2 is not installed or not fully inserted into the printer.
• The media type set in the printer driver is different from the type of media
loaded.
Description
Description
99