Konica Minolta magicolor 2500W Service Manual page 79

5. Other
[1]
7. Remove parameter chip (PJ24) [1] from the printer control board.
NOTE
• When the printer control board (PRCB) has been replaced, be sure to remount
parameter chip (PJ24). Remove parameter chip (PJ24) from the old printer control
board and mount it on the new printer control board.
[1]
42
[3]
[2]
A00VF2C559DA
A
A
4138fs2544c0
Field Service Ver. 1.0 Aug. 2006
5. Remove four screws [1].
6. Disconnect the connector (PJ1) [2]
connected to the image processing
board and remove the printer control
board [3].
NOTE
• When mounting parameter chip
(PJ24), align the notches (indicated
by "A" in the illustration).
A00VF2C560DA