Service Person Sru Usage; Reset Controller; Er Transfer Belt Unit - Konica Minolta magicolor 5430 DL Service Manual

Service Mode (magicolor 5430 DL/5440 DL)
Use
PageScope
Web Connection
*2: XXXXXX are the last 6 digits of the printer MAC address.
Setting 1. Take note of the current setting.
/procedure 2. Enter the Service/Service Person mode.
3. Select RESTORE FACTORY DEFAULT and press the MENU/SELECT key.
4. When the initialization procedure is completed, restart the machine.
5. Make the settings that were valid before initialization once again.
NOTE
• Use this function with the greatest possible care. If this function is executed,
the setting/count values saved in the Parameter Chip on the Mechanical Con-
trol Board are cleared.
• After executing this function, replace the following items with new ones:
All 4 Toner Cartridges
Transfer Roller
Transfer Belt
Fusing Unit
Waste Toner Bottle
5.3.2

SERVICE PERSON SRU USAGE

Function • Displays the remaining life of the Transfer Belt, Transfer Roller, and Fusing Unit.
Use • To check the remaining life of the maintenance service parts.
Setting 1. Enter the Service mode.
/procedure 2. Select SERVICE PERSON SRU USAGE and press the MENU/SELECT key.
3. Select the desired unit using the right and left arrow keys.
5.3.3

RESET CONTROLLER

Function • Resets the controller.
Use • To return the controller to its initial condition.
Setting 1. Enter the Service mode.
/procedure 2. Select RESET CONTROLLER and press the MENU/SELECT key.
3. This automatically restarts the machine and the initial screen reappears.
Item
Primary WINS
Secondary WINS
Rendezvous Service
Discovery
Rendezvous Config
Printer Name
Rendezvous Config
Host Name
IPP Config
Printer Name
IPP Config
Printer Location
3-24
Main Unit Field Service
Factory Default Value
grayout/disabled
grayout/disabled
Checked
KONICA MINOLTA
magicolor 54** DL
MC54**DLXXXXXX *2
magicolor 54** DL
Blank
Ref. Page
-
-
-
-
-
-
-