F98 Output Check: Checking Output Signal - SMC Networks PFCA7 Series Operation Manual

■[F98 Output check] Checking output signal
The operation of the system can be checked by forcibly switching the output ON/OFF operation without
applying the flow rate.
<Operation>
Operate the UP or DOWN button in function selection mode to select [F98 Output check].
Normal output
Check the current output signal.
Select Normal.
Press the SET button on one of the pages.
Press the SET button.
Press the SET button.
Page 1 Page 2
Returns to the [F98 Output check] output signal check.
Shifts to the settings of each item.
Page 3
-44-
No.PF※※-OMA1002