F0 System: System Settings - SMC Networks PFCA7 Series Operation Manual

■[F0 System] System settings
Set the following items:
(1) Fluid
(2) Reference condition
(3) Display units
(4) Switching between NPN and PNP output
(5) IO-Link enable/disable
(6) Output PD setting at communication error
<Operation>
Press the UP or DOWN button in function selection mode to select [F0 System].
Press the UP or DOWN button to select
the item and then press the SET button.
(1) Fluid settings
Select [Fluid].
Press the UP or DOWN button
to select an item.
Air: Dry air, Nitrogen
Argon: Argon
CO : Carbon dioxide
2
Press the SET button.
Press the SET button.
Returns to the [F0 System] settings.
-24-
Shifts to the settings of each item.
No.PF※※-OMA1002