Table of Contents
Advertisement
MPS-10
- Parameter guide
Global Ch ........................................................................................................ 1...16
Specifies the MIDI channel of the MPS-10.
To receive/transmit program changes or other data via MIDI, set the MIDI channel of this unit to
match the MIDI channel of the connected MIDI device.
Control/Program Change Tx/Rx .............................................................. On, Off
Sets whether program changes and control changes are transmitted and received.
CC PAD CC#............................................................................................ 000...119
Sets the CC (control change) number that's output when you operate a CC pad, as well as the number
that's used to control this unit from an external MIDI device.
Exp Pedal CC# ........................................................................................ 000...119
Sets the CC (control change) number that's output when you operate the expression pedal, as well as
the number that's used to control this from an external MIDI device.
FootSwitch 1 CC# ................................................................................... 000...119
Sets the CC (control change) number that's output when you operate foot switch 1, as well as the
number that's used to control this from an external MIDI device.
FootSwitch 2 CC# .................................................................................. 000...119
Sets the CC (control change) number that's output when you operate foot switch 2, as well as the
number that's used to control this from an external MIDI device.
PAD# ................................................................................1...10 / A,B,C,D / Pedal
Specifies the number of the pad for which you want to configure the MIDI settings.
Tip: You can change the pad number by striking the pads.
PAD MIDI Ch ......................................................................................Global, 1...16
Sets the MIDI channel for each pad. Pads that are set to "Global" use the global channel specified in
the global parameters.
Note Number............................................................................................... 0...127
Sets the note number for each pad.
Setup / Display
Use this screen to configure the screen and LED display for the MPS-10.
LCD Brightness ...........................................................................................1...100
Adjusts the display backlight's brightness.
LCD Contrast ................................................................................................ 1...60
Adjusts the display contrast.
Panel LED ....................................................................................................... 1...10
Sets the brightness of the panel LEDs.
71
Advertisement
Table of Contents
