Expression Pedal Jack; Midi Out Connector; To Memory Drive Port; To Pc Port - Korg MPS-10 Owner's Manual

Hide thumbs Also See for MPS-10:

Table of Contents

MPS-10

- Introduction

8. EXPRESSION PEDAL jack

Connect a Korg XVP-20, EXP-2 expression pedal or similar pedal here. You can assign functions to the

pedal, such as looper volume adjustment.

Note: If you're using the pedal for the first time, calibrate the pedal. ( p. 75, "How to calibrate the pedal")

Use this to connect to an external sound generator or other MIDI device. When you use a cable to con-

nect the MIDI OUT connector of the MPS-10 to the MIDI IN connector of an external MIDI device, you

can use the pads of the MPS-10 (or the pads connected to the MPS-10) to play the external MIDI

device.

Connect a commercially available USB flash drive here. WAV files and setting data can be read and

written to and from the flash drive.

Make sure to format the USB flash drive on this unit before use.

Note: A USB flash drive with up to 2 TB capacity can be used. Some USB flash drives may not work with the MPS-10.

Note: Some USB flash drives may heat up when accessed at high speeds.

To exchange MIDI message data between the MPS-10 and your computer, connect the TO PC port of

this unit to your computer with a commercially available USB 2.0 cable. This port can also send and

receive USB audio signals.

Connect the included AC adapter here.

By attaching a commercially available mount adapter, you can mount the MPS-10 onto a cymbal stand

or the like.

Table of Contents