Sample Edit / Truncate - Korg MPS-10 Owner's Manual

Hide thumbs Also See for MPS-10:

Table of Contents

MPS-10

- Parameter guide

SAMPLE EDIT / Truncate

Use this to truncate (delete) the portions of the SAMPLE before the start point and after the end

point that you set, according to the "Function Type" (explained below).

Function Type ...................................................Manual, Adjust to BPM, Attack

Function Type: Manual

Truncates (deletes) the portions of the SAMPLE before the start point and after the end point that

you set.

Before START ............................................................................................ On, Off

Enables/disables SAMPLE deletion prior to the start point.

After END................................................................................................... On, Off

Enables/disables SAMPLE deletion after the end point.

Function Type: Adjust to BPM

Truncates or adds to the end of the SAMPLE data so that it matches the specified number of mea-

sures, time signature (beat) or the SAMPLE length specified by the BPM.

Measure ................................................................................... Off, 0.5, 001...999

Sets the number of measures of the SAMPLE to be created.

Beat..................... 1/2...24/2, 1/4...24/4, 1/8...24/8, 1/8t...24/8t, 1/16...24/16

Sets the beat (time signature) of the SAMPLE to be created.

BPM...............................................................................................30.00...300.00

Sets the BPM of the SAMPLE to be created.

Table of Contents