MPS-10
- Introduction
Introduction
Thank you for purchasing the Korg MPS-10 Drum, Percussion & Sampler Pad.
To help you get the most out of your purchase, please read this manual carefully.
Main features
Rich expressiveness and a wide variety of presets
The MPS-10 features a wide variety of presets to cover many different genres, whose sounds change
in diverse ways depending on how you play them. This unit also includes a large selection of loop
sounds, extending its usefulness beyond that of a simple percussion sound source.
You can switch between sounds without interruption, making the MPS-10 a formidable choice for live
performance.
Continuous control pads
With continuous control pads (CC pads: the four pads at the top of the panel), you can control param-
eters such as the built-in effects in real time, according to where you strike the pads.
Four-track looper
The MPS-10 features a four-track looper that lets you record not only the sound from this unit, but
also audio from external input as well.
As each track can be recorded and played back in sync, and this unit also features a built-in effects
unit for the looper, you can play the MPS-10 like a DJ.
Sampler
With the sampler, you can sample both the sound from this unit and from an external input at the
same time. You can play the sampled sounds right away on the pads of the MPS-10. You can also edit
the data that you sampled on this unit.
SET LIST function
You can reorder the KITs in the order you like. You can register up to eight set lists.
Connecting to a computer
This unit can transmit and receive MIDI messages and USB audio signals to/from a computer that's
connected via USB.
USB flash drive support
Use a USB flash drive to import sample data into this unit that was created on a different device, or to
back up the settings of the MPS-10.
5