CD-ROM. Operating requirements 3. Connect the M50’s USB connector to a USB port of your computer. 4. Make the necessary settings on the M50 and on KORG USB-MIDI driver your computer.
Page 3
2. Follow the on-screen instructions to install the desired software such as the KORG USB-MIDI Driver Tools and M50 Editor/Plug-In Editor. Note: If you intend to use the M50 and computer via the USB port, you must install the KORG USB-MIDI Driver Tools.
Page 4
Note: The driver must be installed separately for each Allowing installation of drivers that are not USB port. If you connect the M50 to a USB port other digitally signed (Windows only) than the one for which you installed the KORG USB- If the computer you’re using has been set to forbid the...
Mac OS X USB connection and setup Installing the software Note: The USB connector of the M50 is only able to You’ll need to run the installer separately for each transmit and receive MIDI data.
Page 6
Connecting a computer If you want to apply a plug-in effect to the M50’s audio Global mode settings on the M50 signals, or to control the M50’s audio signals in your host application together with the audio data from the...
Page 7
4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan 2008 KORG INC.