Auto Power Off; Display - Korg Pearl eMerge MDL1 Owner's Manual

AUTO POWER OFF

Sets whether the auto power off function is enabled or disabled.
When this function is enabled, the power will automatically shut off if there is no input
from the pads or no signal is received from any of the input jacks for a certain period of
time.
• Auto Power Off .............................................................................................. Disable, 4hours
Shows the current auto power off settings. (The default setting is 4 hours.)
Use the dial if you wish to change this to a different setting.
Tip:
The auto power off count will be canceled under any of the following conditions:
Audio input is received, panel is operated, a pad is triggered, a song is played
back, a training recording is played back, the metronome is in use
[STORE] function button
Press the [STORE] function button to store the settings. Press the EXIT button to cancel
the settings.

DISPLAY

This adjusts the contrast and brightness of the display.
This function also turns the light of the kick pad on and off.
• LCD Contrast ...............................................................................................................01...10
Adjusts the display contrast.
• LCD Brightness ............................................................................................................01...10
Adjusts the brightness of the display backlight.
• Kick Pad Light ............................................................................................................. Off, On
Switches the kick pad light on/off.
Note:
The light can only be turned on/off if the trigger type for the kick pad is set to
"EM-KCPC/EBP"(→ p.38 "TRIGGER PAD").
[STORE] function button
Press the [STORE] function button to store the settings. Press the EXIT button to cancel
the settings.
- 53 -
Configuration Guide