Using The Metronome - Korg MPS-10 Owner's Manual

Hide thumbs Also See for MPS-10:

Table of Contents

MPS-10

- Playing the MPS-10

While the SET LIST function is on, SET LIST MODE is added to SW MODE, and pressing the SW MODE

button toggles between LOOPER, CC PAD and SET LIST.

In SET LIST mode, use the TRACK 1–4 buttons to switch between KITs.

The KIT numbers registered to the set list are shown in groups of four in the bottom of the screen.

Switch to a different KIT by pressing one of the TRACK 1–4 buttons that's lit green.

You can also use the KIT +/- buttons and the VALUE knob to switch the KITs to show list numbers in a

set list.

The numbers below the KIT numbers show the list numbers within the set list.

Also, the KIT numbers that are dimly shown to the left and right show the list numbers before and

after the four KITs that are currently shown.

See "SET LIST" on page 72 for how to edit the set list.

Note: Long-press the SW MODE button while in SET LIST mode to exit SET LIST mode.

Using the metronome

The MPS-10 features a metronome, which acts as a guide to help you keep the tempo.

The metronome starts and stops with each press of the METRONOME knob.

Turn the METRONOME knob to adjust the tempo.

You can set the time signature, metronome sound and volume in the METRONOME menu on

the Setup page, accessible from the UTILITY button.

Table of Contents