Changing The Kits; Viewing The Top Page; Using The Button To Select A Kit; Using The Knob To Select A Kit - Korg MPS-10 Owner's Manual

MPS-10
- Playing the MPS-10
By switching the SW MODE to CC PAD, you can use the track 1–4 buttons to switch the CC pad func-
tion on/off.

Changing the KITs

A "KIT" consists of 10 pad sounds in the MPS-10, four pad sounds that can be connected externally,
and the sound that can be played when you press a connected expression pedal, for a total of 15 dif-
ferent sounds.
By selecting this KIT, you can switch between the sounds assigned to each pad and play them.

Viewing the top page

The page that's shown on the display when you turn on the power is called the "top page".
The KIT number and name, CC pad state, looper status and so on are shown on the top page. You can
use the KIT + and – buttons as well as the VALUE knob to switch between KITs. You can also use the
pads or a footswitch to change the KITs.

Using the button to select a KIT

Press the KIT + and – buttons to switch between the KITs before and after the current KIT.
When you select KITs in order, this lets you quickly switch between them when you're performing.

Using the knob to select a KIT

You can also use the VALUE knob to select a KIT number, which lets you freely switch between KITs.
1
Turn the VALUE knob to move the cursor to a KIT number.
15