Kit Edit / Exp Pedal - Korg MPS-10 Owner's Manual

MPS-10
- Parameter guide
PAD1............................................................... PAD1...PAD10 / A, B, C, D / Pedal
PAD2.............................................................. PAD1...PAD10 / A, B, C, D / Pedal
Selects the pad that switches when you operate the foot switch.
Polarity ..............................................................................................................-, +
Lets you change the foot switch direction in which PAD 1 switches with PAD 2.
-: The pads switch when you release the foot switch.
+: The pads switch when you press the foot switch.
Note: The pad in question is shown in dark gray when "PAD Exchange" is configured on the expression pedal side.
To avoid duplicating the PAD Exchange settings for a pad, you cannot select a pad shown in dark gray.

KIT EDIT / Exp Pedal

You can set the function that's used when an external expression pedal is connected.
Pedal Assign
Control Param.......................................... Global, Looper Volume, Filter Cutoff,
Reverb Mix, PAD Decay, PAD Pitch
Sets which function to assign to the connected expression pedal.
Note: There are also expression pedal settings in UTILITY. When set to "Global", the settings in UTILITY are
applied.
To use the "PAD Exchange" function, you must use the METRONOME knob to navigate between pages
and then configure the PAD EXCHANGE parameters.
Min.................................................................................................-100%...+100%
Sets the minimum value for the pedal.
PAD .........................................................................PAD1...PAD10/A,B,C,D/Pedal
Selects the target pad when "Control Param" is assigned to PAD Decay or PAD Pitch.
Max................................................................................................-100%...+100%
Sets the maximum value for the pedal.
Curve............................................. Linear, Exp1, Exp2, Exp3, Log1, Log2, Log3
Selects one of seven settings for the pedal output value curve.
PAD Exchange
49