System; Usb Memory Format; Factory Reset - Korg MPS-10 Owner's Manual

Hide thumbs Also See for MPS-10:

Table of Contents

MPS-10

- Parameter guide

Note: When you try to delete the "Root" category, all files within the category are deleted but the "Root" category

itself remains.

System

Here you can format a USB flash drive, restore the factory default settings and update the system.

This formats (initializes) the USB flash drive.

Move the cursor to "USB Memory Format" and press the ENTER button.

A message will display on the page to confirm the format procedure.

Press the ENTER button again to begin formatting. To cancel formatting, press the EXIT

button.

Note: Make sure to format the USB flash drive on the MPS-10 before use.

Note: Formatting the USB flash drive will erase all its data. Back up any data on the flash drive that you wish to

save by copying it to your computer or other device, before formatting the drive.

You can restore all of the MPS-10 settings to their factory-set default state.

Move the cursor to "Factory Reset" and press the ENTER button.

A message will display on the page to confirm the reset procedure.

Press the ENTER button again to restore the factory default settings.

To cancel the reset, press the EXIT button.

Note: This deletes any settings such as KITs, INSTs, SAMPLEs or system data as well as data you've recorded. The

data cannot be recovered. Before you proceed, make sure that you want to erase the data and settings. Back up

any data that you want to keep to a USB flash drive, such as user data, system data and so on.

Table of Contents