Inst / Block Layout Edit - Korg MPS-10 Owner's Manual

Hide thumbs Also See for MPS-10:

Table of Contents

MPS-10

- Parameter guide

Curv B.......................................... Linear, Exp1, Exp2, Exp3, Log1, Log2, Log3

Sets the velocity curve from the second to the third point.

Linear

Exp1

Exp2

Exp3

Velocity 3 ..................................................................................................... 1...127

Sets the velocity value of the third point for each OSC.

Level 3 .........................................................................................................0...100

Sets the level of the third point for each OSC.

INST / Block Layout Edit

You can use up to eight SAMPLEs to configure the sound layout for each OSC.

In the graph shown here, the Y-axis indicates the velocity and the X-axis indicates "Round Robin". The

brightly highlighted light-blue blocks indicate the currently selected block, and the white line on the

left side of the block indicates a currently selected velocity layer.

What's "Round Robin"?

"Round Robin" is a function that sequentially plays the specified blocks, even if the note was trig-

gered within the same velocity layer. This reduces the unnatural sound that results from repeatedly

triggering the same SAMPLE. You can also use this function to play different notes or instrument

SAMPLEs each time you strike a pad, creating simple sequences.

Tip: Strike the specified pad repeatedly to play the SAMPLEs and hear how they sound. The block shown in white

text is the last block that was played.

Layer # .............................................................................................................1...8

Sets the number of the velocity layer (with each velocity layer represented by the rows on the screen)

you want to edit. Although there are a maximum of eight layers (represented by the columns on the

screen), you can use the "Round Robin" setting shown below to change the maximum number of lay-

ers (the "Layer #").

Note: For example, when you use all eight layers, you can't make more than one set with Round Robin.

Bottom Velocity........................................................................................... 1...127

Sets the minimum (lowest) velocity value for the selected layer.

Log1

Log2

Log3

Table of Contents