Function Assign; Function Assign / Pad Function - Korg MPS-10 Owner's Manual

Table of Contents

MPS-10

- Parameter guide

Name [---] ...............................................................................................................

Press the EDIT button to change the name of the selected set list. ( p. 24, "Using the Name dialog

box (how to change the name)")

#, KIT Name............................................................................................................

The numbers shown in the "#" column (01–24) represent the numbers within the set list. Use the

VALUE knob to select the number of the KIT you want to edit in the set list, and press the ENTER but-

ton to edit the KIT whose number you selected.

Press the KIT + button to insert the currently selected KIT into the list.

Press the KIT - button to delete the currently selected KIT from the list.

Note: Once you've deleted all KITs from the list, that set list is deleted from the selectable set lists in LIST Select.

However, you can't delete the set list if it is the only remaining set list that can be selected.

Tip: When you delete all registered KITs to clear the list, that set list is deleted.

Function Assign

You can assign performance functions like KIT change, FX ON/OFF and so on to be triggered by the

pads, foot switches and pedal.

On this screen, you can assign the following functions to the 15 pads built into the MPS-10.

Tip: You can't assign more than one function to the same pad.

Tip: "--" indicates that the function is not assigned to a pad.

KIT+ .................................................................. PAD1...PAD10 / A,B,C,D / Pedal

Sets the pad that's used for changing to the next KIT.

KIT-.................................................................... PAD1...PAD10 / A,B,C,D / Pedal

Sets the pad that's used for changing to the previous KIT.

IFX1 On/Off....................................................... PAD1...PAD10 / A,B,C,D / Pedal

Sets the pad that enables/disables Insert FX1.

IFX2 On/Off...................................................... PAD1...PAD10 / A,B,C,D / Pedal

Sets the pad that enables/disables Insert FX2.

Table of Contents