Korg MPS-10 Owner's Manual page 91

MPS-10
- Parameter guide
4
Move the cursor to "Execute" and press the ENTER button. The following confirmation
message is shown.
5
Press the ENTER button to finish deleting the file. When you delete a SAMPLE, the audio file
saved in the MPS-10's internal memory is also erased.
Note: Use caution, as you can't recover a file once it's been erased.
Note: When you delete an INST, [--OFF--] is assigned to the pads of the KIT that refers to that INST. Also, if you
delete a SAMPLE, [--OFF--] is assigned to the block of the OSC that refers to that SAMPLE.
Deleting the categories and all the SAMPLEs/INSTs within the categories
In this example, we delete "UserCategory1" and all INST data in the category.
1
Select "INST Category ..." on the Data Management/Delete page, and press the ENTER button.
Tip: To delete the SAMPLE data within the category, select "SAMPLE Category ..." here.
2
Select the category to delete.
3
Move the cursor to "Execute" and press the ENTER button. The following confirmation
message is shown.
4
Press the ENTER button to finish deleting the category and files. When you delete a SAMPLE,
the audio file saved in the MPS-10's internal memory is also erased.
Note: Use caution, as you can't recover a file once it's been erased.
Note: When you delete an INST, [--OFF--] is assigned to the pads of the KIT that refers to that INST. Also, if you
delete a SAMPLE, [--OFF--] is assigned to the block of the OSC that refers to that SAMPLE.
91