Emerson Rosemount 3410 Series Installation Manual page 31

Installation manual
00825-0600-3104
Operators SHALL NOT use Eye Bolts (see
lifting or maneuvering the meter.
Operators SHALL NOT use other Hoist Rings that do not fully seat flush with the counter
bore on the top of the meter flanges.
Figure 2-10: Meter end flange with tapped flat-counterbore hole for hoist ring
A. Plug bolt
B. Flat counterbore surface
Figure 2-11: Safety-approved hoist ring
Installation manual
Figure 2-12) in the flange tapped holes to aid in
Mechanical installation
October 2023
31