Fcc Compliance; References - Emerson Rosemount 3410 Series Installation Manual

Installation manual
00825-0600-3104
Series engineering drawings
Flow Meters operate within the pressure and temperature range of the device (also see
Design of Rosemount 3410 series
approved to the ATEX Directive 94/9/EC.
Standards
• US
• Canada
• Europe
—
—
—
—
—
Approval agencies
• UL
• c-UL
• DEMKO
• INMETRO
• NEPSI
• GOSTR
Important
Please consult Emerson Flow services for Rosemount products for the complete metrology
approvals list.
1.10

FCC compliance

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference. In such a case, the user will be required to correct
the interference at their own expense.
NOTICE
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
1.11

References

1. Gould Modbus Protocol Reference Guide, Rev. B, PI-MBUS-300
Installation manual
and observe all safety precautions. 3410 Series Gas Ultrasonic
Explosive Atmospheres (ATEX)
International Electrotechnical Commission (IECEx)
Pressure Equipment Directive (PED via BSI)
Electromagnetic Compatibility (EMC)
International Organization of Legal Metrology (OIML)
meter). 3410 Series Gas Ultrasonic Flow Meters are
Introduction
October 2023
19