Table of Contents
Advertisement
Mounting
May 2019
A. Circlip
B. PFA ring
C. PFA ring and circlip attached
3.7
Rotate the electronics on the meter (optional)
You can rotate the transmitter on the meter up to 90°.
Procedure
1. Using a 4 mm hex key, loosen the cap screw that holds the transmitter in place.
2. Rotate the transmitter clockwise to the desired orientation up to 90°.
3. Secure the cap screw in place and tighten to 60 in lbf (7 N m).
36
Figure 3-26: Component to secure transmitter in place
A. M5 socket-head cap screw
A
B
A
Micro Motion Fork Density Meter
Installation Manual
MMI-20020989
C
Advertisement
Table of Contents
