Glossary - KEB COMBIVERT F6 Instructions For Use Manual

Glossary

Glossary
Application
The application is the intended use of the KEB
product.
Autonegotiation
Procedure for determining the max. transmission
speed.
BiSS
Open source real-time interface for sensors and
actuators.
CAN®
Serial bus system running protocols such as
CANopen, Devicenet or J1939. CAN is a re-
gistered trademark of the CAN in AUTOMATION -
International Users and Manufactures Group e.V.
COMBIVERT
Proper name for a KEB Drive Controller.
COMBIVIS
KEB start-up and parameterizing software.
Customer
The customer has purchased a product from KEB
and integrates the KEB product into his product
(customer product) or resells the KEB product (re-
seller).
DC-Value
Diagnostic coverage measures the quality of test-
ing and monitoring measures in accordance with
ISO 13849-1.
DIN 66019
Information processing; control method with the 7-
bit code during data transmission.
DIN EN 61131-2
Programmable controllers - Part 2: Equipment re-
quirements and tests.
Directive 2006/42/EC
Machinery Directive
Directive 2014/30/EU
Electromagnetic Compatibility (EMC) Directive
50
Emergency off
Switching off the power supply in case of emer-
gency.
Emergency stop
Shutting down a drive in case of emergency (not
de-energised).
EN 60204-1
Safety of machinery - Electrical equipment of ma-
chines - Part 1: General requirements (VDE
0113-1, IEC 44/709/CDV).
EN 61800-5-1
Adjustable speed electrical power drive systems.
Part 5-1: Safety requirements - Electrical, thermal
and energy requirements (VDE 0160-105-1, IEC
61800-5-1)
EN 61800-5-2
Adjustable speed electrical power drive systems.
Part 5-2: Safety requirements - Functional safety
(VDE 0160-105-2, UL 61800-5-2, IEC 22G/264/
CD)
EnDat
Bidirectional encoder interface of the company
Heidenhain.
EtherCAT®
EtherCAT is a real-time Ethernet bus system.
EtherCAT is a registered trademark and patented
technology, licensed by Beckhoff Automation
GmbH, Germany.
Form C
IEC
NFPA
Form C describes a relay with three contacts
(switching contact, break contact and make con-
tact). Also referred to as SPDT (single pole,
double throw).
ma_dr_f6-cu-k-inst-20144795_en
KEB Automation KG