Copyright; Validity Of This Manual; Target Group - KEB COMBIVERT F6 Instructions For Use Manual

1 | Introduction
1.5 Copyright
1.6 Validity of this manual
1.7 Target group
10
The customer may use the instructions for use as well as further documents or
parts from it for internal purposes. Copyrights are with KEB Automation KG and re-
main valid in its entirety.
Other wordmarks and/or logos are trademarks (™) or registered trademarks (®) of
their respective owners.
This part of the instruction manual describes the implemented control card.
• The control card is only valid in conjunction with the instructions for use of the
power part.
• The control card contains only supplementary safety instructions.
• If certain functions or properties are version-dependent, this is indicated at the
appropriate place. The version number of the COMBIVERT can be found in
brackets after the material number.
The instructions for use is determined exclusively for electrical personnel. Electrical
personnel for the purpose of this instruction manual must have the following quali-
fications:
• Knowledge and understanding of the safety instructions.
• Skills for installation and assembly.
• Start-up and operation of the product.
• Understanding of the function in the used machine.
• Detection of hazards and risks of the electrical drive technology.
• Knowledge of IEC 60364.
• Knowledge of national safety regulations (e. g. DGUV Regulation 3).
KEB Automation KG
ma_dr_f6-cu-k-inst-20144795_en