Processor Problems - Gateway E-5200 Maintaining And Troubleshooting

62 Maintaining and Troubleshooting Your E-5200 System
The printer is turned on but will not print
Probable Cause
The printer is not
connected to the
system.
The printer is not
designated as the
default printer.
The printer has not
been added to the
system.
The printer prints garbled text
Probable Cause
The wrong driver is
being used for the
selected printer.

Processor Problems

A new processor is not recognized by the system
Probable Cause
The processor was
installed incorrectly.
The processor speed
was not selected on the
system board.
Solution
Check the data cable between the printer and
the system. Make certain it is connected to
the proper port. Check the connector and
cable for bent or broken pins.
If the printer to which you are trying to print is
not the default printer, make certain you have
selected it through the application's printer
setup function.
From the Printers window (
Printers
), double-click
the directions for adding the new printer.
Solution
From the Printers window (
Printers
), select the printer. From the
Properties
menu, click
printer is using the right printer driver. If not,
install the correct one.
Solution
Check the installation. The processor should
be recognized automatically if it was installed
correctly.
Set the system board jumpers to select the
proper processor speed.
Start Settings
| |
Add Printer
. Follow
Start Settings
| |
File
. Make certain the