Table of Contents
Advertisement
Attach the drive to the chassis with four screws.
6.
Connect the cables to the drive.
7.
Replace the system cover (see page 6 for instructions). Plug in the
8.
power cord and turn on the computer.
Configure the drive in Setup.
9.
If the system does not recognize the new drive, see "CD-ROM
Problems" on page 55 or "Diskette Drive Problems" on page 57 of this
guide for troubleshooting information.
Chapter 3: Installing Components
31
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the E-5200 and is the answer not in the manual?
Questions and answers