Gateway E-5200 Maintaining And Troubleshooting page 9

Note:
Your computer includes an
anti-intrusion switch on the
cover. If you attempt to
remove the cover without
turning off the computer,
your computer will
automatically turn off.
4 Maintaining and Troubleshooting Your E-5200 System
The directions that follow tell you how to remove and side panels of the
cover and the front bezel.
Turn off the computer and disconnect all power cords.
1.
Turn the computer so that the back of the computer faces you. Remove
2.
the two thumbscrews that attach the right side panel to the back of the
computer and the two Phillips screws that attach the left panel.
Grasp the right panel by the handhold in the panel and slide the panel
3.
towards you until the panel clears the chassis. You may need to pull the
panel to disengage the tabs at the front of the panel from the chassis.
Slide the left panel towards you until the panel clears the chassis.
4.
To remove the cover