Gateway E-5200 Maintaining And Troubleshooting page 12

Place the left side panel onto the chassis and slide the panel toward the
2.
front of the chassis. Replace the two screws that attach the panel to the
chassis.
Place the right side panel onto the chassis, making sure the panel fits
3.
into the rails on the chassis. Slide the panel toward the front of the
chassis until the tabs on the panel fit under the rim of the chassis. You
may need to tap the back of the panel to fit the tabs in place. Replace
the two thumbscrews that attach the panel to the chassis.
Chapter 1: System Access 7