Gateway E-5200 Maintaining And Troubleshooting page 29

24 Maintaining and Troubleshooting Your E-5200 System
Replace the system cover (see page 6 for instructions) Plug in the
1.
power cord and turn on the computer.
Use the modem documentation to connect the telephone cables to the
2.
jacks in the back of the modem.
Set up the modem through your computer's operating system. See
3.
your modem documentation for instructions.
Try connecting to your Internet service provider or a bulletin board
4.
service.
If the modem does not connect, see "Expansion Card Problems" on
5.
page 55 and "Modem Problems" on page 60 for troubleshooting
information.
To install a modem