Bios Beep Codes - Gateway E-5200 Maintaining And Troubleshooting

BIOS Beep Codes

If POST detects errors, the computer emits a series of beeps to indicate the
problem. The following table lists these beep codes.
Beeps
1
2
3
4
5
6
7
8
9
10
11
12
Continuous
Description
Insert diskette in diskette drive A.
Gw2kboot.rom file not found in root
directory of the diskette in diskette drive
A.
Base memory error.
Flash programming successful.
Diskette read error.
Keyboard controller BAT command
failed.
No flash EPROM detected.
Diskette controller failure.
Boot block BIOS checksum error.
Flash erase error.
Flash program error.
Gw2kboot.rom file size error.
Flash programming successful. Turn off
system and turn on again.
Chapter 5: Troubleshooting 69