Getting A List Of S-Register S2-4; Understanding Bit-Mapped S-Regi - 3Com Courier Reference

2-4 C 2: U
HAPTER SING THE
Getting a list of
S-Registers
Understanding
bit-mapped
S-Registers
AT C S
OMMAND ET
To display
A list of S-Registers
In order to issue this command, you must be in Terminal Mode.
See Appendix A, S-Registers for a complete list of S-Registers.
A bit-mapped S-Register uses one number to describe a collection of
settings. Bit-mapping allows us to pack a lot of information in a small
space.
Bit-mapped registers are in the form of Sr.b=n, where r is the bit-mapped
register; .b is the bit; n is 0 (off) or 1 (on)
See Appendix A, S-Registers to see how bits are mapped into decimal
values and for information about setting bit-mapped S-Registers.
Command
ATS$