Bis Reference; Command - 3Com Courier Reference

E
Commands
V.25
BIS
The commands and result codes described in this section are sent and
recognized by your V.25 bis communications software. You are not
expected to send them to the modem the way you do with A
commands.
CIC Connect incoming call
CRN Call request using
number provided
CRS Call Request with
memory location
DIC Disregard incoming call
PRNn Program number
RFN Request list of
forbidden numbers
RLN Request list of stored
numbers
R
EFERENCE
Instructs the Courier V.Everything
mode
Instructs the Courier V.Everything
mode
this command. Example:
CRN18005551234
Instructs the Courier V.Everything
mode
memory. Example: CRS3
Instructs the Courier V.Everything
mode
overrides auto answer for this call.
Stores a number in NVRAM. Example:
PRN3; 18005551234
Instructs the Courier V.Everything
mode
which the Courier V.Everything
mode
Instructs the Courier V.Everything
mode
stored in NVRAM.
to answer an incoming call.
to dial the number following
to dial a number stored in
to disregard an incoming call
to list the numbers with
is unable to connect.
to list the numbers previously