Table of Contents
Advertisement
Installing the Latest
Softwar
Accessing Your
Internet Service
Provide
4 Windows 95/98 displays a window asking you to choose your modem
type from the list. Select the your modem from the list and click OK.
Your modem is now ready to use!
See Chapter 3, Upgrading your Mode
your Courier V.Everything modem's software.
This section explains how to set up your modem to access the Internet or
remote Local Area Networks (LANs) using Windows 95/98 Dial-U
Networking. To access Internet Service Providers (ISPs) or remote LANs
you must do the following:
Step One: Determine if Dial-Up Networking is Installed
1 Click Start | Settings | Control Pane .
2 On the Control Panel, double-click Network. The "Network" window
will appear
If Dial-Up Adapter Do this
Is listed
Is not listed
3 Return to the Control Panel and double-click Add/Remove Programs to
open the "Add/Remove Programs Properties" window.
4 Click the Windows Setup tab.
5 Double-click Communications. The following window appears
for information about upgradin
Go to the section "Installing TCP/IP Support" to install Dial-Up
Networking.
Go to Step 3 below.
Windows 95/98
1-3
Advertisement
Table of Contents
