Dialing , Answering , And; Dialin G5-1; Dial Option S5-1 - 3Com Courier Reference

5
Dialing
Dial options
D , A
IALING
H
ANGING
This chapter explains how to use basic AT commands for:
Dialing
Carrier loss redial
Answering calls
Making International calls
Call detection
Caller ID functions
Distinctive Ring support
You can use your modem to dial the specified telephone number an
execute dial options by using the following commands.
For your modem to
Dial the specified phone number and execute dial
options (DO NOT use spaces or dashes).
Tone dial.
Pulse dial.
Pause for the length of time specified by S-Register 8.
The default is 2 seconds.
Pause for 125 milliseconds.
Wait for a second dial tone before continuing dialing.
This command only works only if the X3 (or higher)
command has been issued (see Chapter 7, Controlling
Result Code Displays and Appendix D, Result Code
Meanings and Sets). If the modem is set to X2 or lower,
it interprets the W as a two-second pause, unless it
detects a second dial tone within two seconds.
NSWERING
U
P
,
AND
Command
ATD phone number
ATDT
ATDP
ATD, (Comma)
ATD/ (Slash)
ATDW