Controlling Result Code Displays; Result Code Display Comman - 3Com Courier Reference

7
Result Code Display
Commands
C
ONTROLLING RESULT CODE
DISPLAYS
This chapter contains information about:
Result Code Display commands
Additional Result Code subsets
The commands listed below control whether result codes are displayed,
and in what format they are displaye
.
If you want the modem to
Display result codes.
NOT display result codes.
NOT display result codes while in Answer mode. See Chapter
4, Modes of Operation, for a description of modes.
Display result codes in numeric form.
Display result codes in verbal form.
Display result codes when originating, answering, and
retaining a call.
Display result codes ONLY when originating a call
Display sets of result codes. See Appendix D, Result Code Sets
and Meanings.
For all Courier V.Everything modems, except the PC card version, DIP
switch 3 overrides the Qn setting, DIP switch 2 overrides Vn setting, and
DIP switch 7 overrides the S14.1=n setting.
Command
ATQ0
ATQ1
ATQ2
ATV0
ATV1
ATS14.1=0
ATS14.1=1
ATXn
(Default ATX7)