Eanings And - 3Com Courier Reference

D
Result Code
Meaning
R C
ESULT
S
ETS
Result Code
0/OK
1/CONNECT
2/RING
3/NO CARRIER
4/ERROR
5/CONNECT 1200
6/NO DIAL TONE
7/BUSY
8/NO ANSWER
11/RINGING
12/VOICE
170/RING A
171/RING B
172/RING C
173/RING D
174/RING E
Wait for another Dial
Tone (W)
Wait for an answer (@)
M
ODE

EANINGS AND

Meaning
Command has been executed.
Connection with another device.
Incoming ring detected.
Carrier Detect has failed, or carrier has been dropped due to
disconnect.
Command is invalid.
Connection at reported rate. Same meaning for results of 2400
(10), 4800 (18), 7200 (20), 9600 (13), 12000 (21), 14400 (25),
16800 (43), 19200 (85), 21600 (91), 24000 (99), 26400 (103),
28800 (107), 31200 (151), 33600 (155), 56000 (162), or 64000
(165) bps.
Dial tone not detected during the default 2 seconds, set in Register
S6.
Busy signal detect; modem hangs up.
After waiting 5 seconds for an answer, modem hangs up; returned
instead of NO CARRIER when the @ option is used.
The modem has dialed; remote phone line is ringing.
Voice answer at remote site; modem hangs up.
Incoming distinctive ring detected.
Incoming distinctive ring detected.
Incoming distinctive ring detected.
Incoming distinctive ring detected.
Incoming distinctive ring detected.
Courier V.Everything modem continues diaing as soon as it detects
another dial tone. Requires X3 or higher.
Courier V.Everything modem continues dialing when it detects 5
seconds of silence on the line. Requires X3 or higher.