Percent (%) Command Set - 3Com Courier Reference

B-12 A B: A
PPENDIX LPHABETIC
Percent (%)
Command Set
C S
OMMAND UMMARY
resumes, the modems build new tables, and the result is lower-than-
normal throughput.
Command Function
&Zn=s Store up to 10 numbers in NVRAM, where n is the position 0-9 in
NVRAM, and s is the phone number string. The number string may
be up to 36 characters long, including any Dial command options.
Example: AT&Z2=555-6789
In the following example, &M0 (no error control) is inserted before
the Dial command: AT&M0 DS2
This command functions differently when Dial Security is enabled
Also, do not include modem settings in the &Zn string. If the call
requires a special setting, insert it in the command string before the DS
command
&Zn=L Stores the last-dialed number in position n.
&Zn? Display the phone number stored in NVRAM at position n (where n
= 0-9).
&ZC=s Store command string s in NVRAM. The command string can be up
to 30 characters long; spaced do not count. This command is used
so you can call another modem without loading your
communications software.
&ZC? Display the stored command string.
Command Function
%$ Display the help panels for the percent (%) command set.
%An Create and configure security accounts.
%Bn Remotely configure a modem's serial port rate.
%B0
%B1
%B2
%B3
%B4
%B5
%B6
%B7
110 bps
300 bps
600 bps
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps