Table of Contents
Advertisement
14-2
C
14: D
HAPTER
ISPLAYING
Q
H
UERYING AND
ELP SCREENS
For your modem to
Perform a test of the modem's random-access
memory (RAM) and display either OK (0) or ERROR
(4), followed by OK when the test is completed.
You may want to use this command if the Courier
V.Everything modem appears to be malfunctioning.
Display the Courier V.Everything modem 's banner,
or product title.
Display the Courier V.Everything modem 's current
configuration.
Display the configuration saved in nonvolatile
random access memory (NVRAM). If your Courier
V.Everything mode
connects to a device that has
Dial Security and local access enabled, you cannot
view the stored phone numbers.
Display a diagnostic summary. During a
connection, the Courier V.Everything mode
monitors and stores information about link
operations. When the call is ended, you can
request a diagnostic summary.
The duration of the last call or the real time is
displayed, depending on the modem clock setting.
For calls under data compression, the number of
characters sent may be less than the number of
octets sent, due to data compression operations.
Display the product configuration.
Lists phone numbers with redial instructions.
Displays modem's Plug and Play ID.
Display the Dial Security Account Status. For
security administrators only, unless local security is
disabled (S53=0 or S53.2=0)
Display a connection report that 3Com Technical
Support representatives use to help you solve
problems.
Display caller ID information from the current call
(if in progress) or the last call (if between calls).
The caller ID information remains until either the
modem is reset or until the modem receives
another valid caller ID signal.
Display a connection report that 3Com Technical
Support representatives use to help you solve
problems.
Command
ATI2
ATI3
ATI4
ATI5
ATI6
ATI7
ATI8
ATI9
ATI10
ATI11
ATI15
ATI16
Advertisement
Table of Contents
