Table of Contents
Advertisement
Quitting a
Remote-Access
Session
If you restore the original configuration using the AT%C1 command, the
first prompt is restored, assuring you the original configuration is intact.
If you want to quit the remote-access login before you have entered the
password, return online by pressing <Ctrl>C or typing ATO.
After you've entered the password, you can quit by sending one of these
commands:
To end the remote-access session
And keep the connection.
And end the connection.
End the connection, and reset the host modem.
Before you disconnect, issue the ATI5 command to the remote modem
and check its S41 setting. Make sure S41 is set for a value of 1 or greater.
If S41 is set to 0, when you disconnect you will not be able to access the
remote modem again. To prevent this send ATS41=1&W before yo
disconnect.
Quitting a Remote-Access Session
Command
ATO
ATH
ATZ
9-7
Advertisement
Table of Contents
