Octothorpe (#) Command Set - 3Com Courier Reference

B-14 A B: A
PPENDIX LPHABETIC
Octothorpe (#)
Command Set
C S
OMMAND UMMARY
Command Function
%N2
%N3
%N4
%N5
%N6
%N7
%N8
%N9
%N10
%Pn= Disable password security (n=0 or n=1) when no character follows
the equal sign.
%Pn=s Set the following password (s) for viewing privileges only (n = 0),
or view and configuration privileges (n= 1).
%Pn? Display password n.
%S=n Access the security accounts. Does not disable security.
%T Enable the recognition of tone frequencies of analogue dialing
devices.%T is meant primarily for use with network applications,
but may also be integrated into certain software programs. For
example, %T could be used in a security program to identify
incoming tone security codes.
To return the modem to Command mode, press any key or drop
the computer's or terminal's DTR signal. The modem responds OK.
%V=PWn Assign the password in account n in your modem's security
account as your Autopass password
Command Funtion
#$ Display the help panels for the octothorpe (#) command set.
#CID=n Controls the caller ID settings.
#CID=0
#CID=1
#CID=2
#CID=3
1200 bps
2400 bps
4800 bps
7200 bps
9600 bps
12000 bps
14400 bps
16800 bps
19200 bps
Disable caller ID detection and reporting.
Enable caller ID with formatted output.
Enable caller ID with unformatted output.
Enable caller ID with formatted output and name
suppressed.