Eanings And; Result Code Meanings - 3Com 56K Command Reference Manual

D
Result Code
Meanings
R C
ESULT ODE
S
ETS
Result Code
0/OK
1/CONNECT
2/RING
3/NO CARRIER
4/ERROR
5/CONNECT 1200
6/NO DIAL TONE
7/BUSY
8/NO ANSWER
11/RINGING
12/VOICE
170/RING A
171/RING B
172/RING C
173/TING D
Wait for another Dial
Tone (W)
Wait for an answer (@) Business Modem continues dialing when it detects 5
M

EANINGS AND

Meaning
Command has been executed.
Connection with another device.
Incoming ring detected.
Carrier Detect has failed, or carrier has been dropped due
to disconnect.
Command is invalid.
Connection at reported rate. Same meaning for results of
2400 (10), 4800 (18), 7200 (20), 9600 (13), 12000 (21),
14400 (25), 16800 (43), 19200 (85), 21600 (91), 24000
(99), 26400 (103), 28800 (107), 31200 (151), 33600 (155),
56000 (162), or 64000 (165) bps.
Dial tone not detected during the default 2 seconds, set in
Register S6.
Busy signal detect; modem hangs up.
After waiting 5 seconds for an answer, modem hangs up;
returned instead of NO CARRIER when the @ option is
used.
The modem has dialed; remote phone line is ringing.
Voice answer at remote site; modem hangs up.
Incoming distinctive ring detected.
Incoming distinctive ring detected.
Incoming distinctive ring detected.
Incoming distinctive ring detected.
Business Modem continues dialing as soon as it detects
another dial tone. Requires X3 or higher.
seconds of silence on the line. Requires X3 or higher.