Table of Contents
Advertisement
Quick Links
1.
OVERVIEW......................................................................................................................................... 1
2.
INSTALLATION.................................................................................................................................. 2
2.1. VIDEO CONNECTIONS ............................................................................................................ 2
2.2. AUDIO CONNECTIONS ............................................................................................................ 2
2.3. GENERAL PURPOSE OUTPUT CONNECTION ...................................................................... 3
3.
SPECIFICATIONS.............................................................................................................................. 3
VIDEO INPUT ................................................................................................................... 3
3.2. HD SERIAL VIDEO OUTPUT.................................................................................................... 3
3.3. AES AUDIO OUTPUTS ............................................................................................................. 4
3.4. ANALOG AUDIO OUTPUTS..................................................................................................... 4
3.5. GPO ........................................................................................................................................... 4
TO OUTPUT DELAY ........................................................................................................ 4
3.7. ELECTRICAL ............................................................................................................................ 5
3.8. PHYSICAL ................................................................................................................................. 5
4.
STATUS INDICATORS AND DISPLAYS .......................................................................................... 5
4.1. STATUS AND INDICATOR LEDS ............................................................................................ 5
4.1.1. Module Status LEDs....................................................................................................... 5
4.1.2. SDTi Audio and VANC Present LEDs ............................................................................ 6
4.1.3. HD Output Embedded Audio Present LEDs................................................................... 6
4.2. DOT-MATRIX DISPLAY ............................................................................................................ 7
5.
CARD EDGE CONTROLS ................................................................................................................. 8
TABLE OF CONTENTS
.......................................................................................................................... 7
...................................................................................................... 8
......................................................................................................... 9
7771DS-HD HD Decompression Codec
Revision 1.1
7700 MultiFrame Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for evertz 7700
Summary of Contents for evertz 7700
-
Page 1: Table Of Contents
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION..........................2 2.1. VIDEO CONNECTIONS ......................2 2.2. AUDIO CONNECTIONS ......................2 2.3. GENERAL PURPOSE OUTPUT CONNECTION ..............3 SPECIFICATIONS..........................3 3.1. SDT VIDEO INPUT ........................3 3.2. HD SERIAL VIDEO OUTPUT....................3 3.3. - Page 2 7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 5.3. C .................... 9 ONFIGURING THE UDIO ETTINGS 5.3.1. Audio Detection Mode ....................9 5.3.2. Selecting Upstream Audio Source 1 ................9 5.3.3. Selecting Upstream Audio Source 2 ................9 5.3.4. Audio Delay ........................10 5.3.5.
- Page 3 7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 7.1. W LINK™? ......................16 HAT IS ISTA 7.2. V LINK MONITORED PARAMETERS ................17 ISTA 7.3. V LINK CONTROLLED PARAMETERS ................ 17 ISTA 7.4. V LINK TRAPS ....................... 18 ISTA Figures Figure 1: 7771DS-HD Block Diagram ......................... 1 Figure 2: 7771DS-HD Rear Panel........................
- Page 4 7700 MultiFrame Manual 7771DS-HD HD Decompression Codec Tables Table 1: 9 Pin D Connector Pin Definitions......................3 Table 2: Video Output Formats ........................... 4 Table 3: Top Board DIP Switch Functions ......................11 Table 4: Bottom Board DIP Switch Functions ....................11 Table 5: Video Standard Switch Settings......................
- Page 5 September 2005 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either express or implied.
-
Page 7: Overview
The 7771DS-HD supports 1080i/59.94, 1080i/50, 1080p/29.97sF, 1080p/25sF, 1080p/23.97sF and 1035i/59.94 video formats. The 7771DS-HD occupies two card slots and is housed in the standard Evertz 3RU frame that holds up to 15 modules. -
Page 8: Installation
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec INSTALLATION The 7771DS-HD comes with a companion rear plate that has eight BNC connectors, occupying two slots in the 7700FR frame. For information on mounting the rear plate and inserting the module into the frame see the 7700FR chapter section 3. -
Page 9: General Purpose Output Connection
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec A 9 pin D connector labeled ANALOG AUDIO OUT contains 2 balanced analog audio outputs. The connector pinout is shown in Table 1. See sections 5.12 and 5.16 for more information about the analog audio outputs. -
Page 10: Aes Audio Outputs
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec SDTi Input HD Output Common Pixels / Frame Progressive SMPTE Name Active Lines Rate /Interlace Standard 525/29.97 1080i/59.94 1920 x 1080 29.97 274M 525/29.97 1080p/29.97sF 1920 x 1080 29.97 P (sF) 274M 625/25... -
Page 11: Electrical
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 3.7. ELECTRICAL Voltage: +12VDC Power: 12 Watts. EMI/RFI: Complies with FCC regulations for class A devices. Complies with EU EMC directive. 3.8. PHYSICAL 7700 frame mounting: 2 slots 7701 frame mounting: 1 slots... -
Page 12: Sdti Audio And Vanc Present Leds
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec Note: When AUD 1 and AUD 2 are selected to be OFF, the LOCAL FAULT LED does not turn RED on loss of Audio MODULE OK: This Green LED indicates good module health. It will be On when both audio groups 1 and 2 are present, and board power is good. -
Page 13: Dot-Matrix Display
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 4.2. DOT-MATRIX DISPLAY The 4-digit alphanumeric display located on the card edge of the top board is used to display the video standard in use. If manual video standard selection is set (DIP switch 1 On) then the display will always display the selected standard. -
Page 14: Card Edge Controls
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec CARD EDGE CONTROLS 5.1. CARD EDGE MENU CONTROL Additional signal and status monitoring is provided via the 4-digit dot-matrix display located at the card- edge. The card-edge pushbutton and toggle-switch are used to navigate through the display menu. Refer to Figure 4: Card-edge Menu Quick Reference for menu quick reference. -
Page 15: Card Edge Menu Display
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 5.2. CARD EDGE MENU DISPLAY The Card Edge menu is arranged in a layered structure that groups similar configuration items together. The following section gives a brief description of the first level of menus that appear when you enter the Card Edge display. -
Page 16: Audio Delay
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 5.3.4. Audio Delay The 7771DS will except SDTi from the companion 7771CS or Sony HDCAM or similar Tape deck using Sont SDTi compression technology. The DLAY DLAY setting will compinsate for delay for the two types of configurations. Set the EVTZ DLAY to EVTZ when connected to a 7771CS module. -
Page 17: Card Edge Dip Switch Control
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 5.7. CARD EDGE DIP SWITCH CONTROL NOTE: Cards using code previous to 1.0 build 7 will have DIP switch control enabled. Cards using firmware version 1.0 build 7 or newer will have DIP switches disabled, and card edge menu enabled. -
Page 18: Selecting The Output Video Standard (Top Board)
5.11. SELECTING AUDIO DELAY (TOP BOARD) DIP switch 6 on the top card controls the audio delay through the card. Since the Evertz 7771CS does not delay the audio to synchronize it with the video a longer delay is needed in the 7771DS when the 7771CS is it’s SDTi source. -
Page 19: Selecting The Analog Audio Source Channel (Top Board)
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec DIP 6 SDTi source Sony SDTi source (short delay) Evertz 7771CS (long delay) Table 8: Audio delay Switch Settings 5.12. SELECTING THE ANALOG AUDIO SOURCE CHANNEL (TOP BOARD) The 7771DS supports two groups of audio or 4 stereo pairs however only has one stereo pair of analog monitor output. -
Page 20: Selecting If Audio Group 2 Is Enabled Or Disabled (Bottom Board)
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 5.14. SELECTING IF AUDIO GROUP 2 IS ENABLED OR DISABLED (BOTTOM BOARD) DIP switch 7 on the top board allows the second audio group to be output or not (whether embedded in HD or output as AES). When audio selection is manually controlled this switch should reflect the encoders setting. -
Page 21: Jumpers
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec JUMPERS Several jumpers, located at the front of the module are used to preset various operating modes. Figure 5 and Figure 6 show the location of the jumpers on the bottom and top boards respectively. -
Page 22: Selecting Whether Local Faults On The Top Board Will Be Monitored By The Global Frame Status
7.1. WHAT IS VISTALINK™? VistaLINK™ is Evertz’s remote monitoring and control capability over an Ethernet network using Simple Network Management Protocol (SNMP). SNMP is a standard computer network protocol that enables different devices sharing the same network to communicate with each other. For monitoring there needs to be a detecting device that automatically reports all errors to a central alarm and error logging station. -
Page 23: Vistalink Tm Monitored Parameters
Managed devices (such as 7771CS and 7771DS cards), each with a unique address (OID), communicate with the NMS through an SNMP Agent. Evertz VistaLINK™ enabled 7700 series modules reside in the 3RU 7700FR-C MultiFrame and communicate with the manager via the 7700FC VistaLINK™... -
Page 24: Vistalink Tm Traps
7700 MultiFrame Manual 7771DS-HD HD Decompression Codec 7.4. VISTALINK TRAPS Table 16: VistaLINK™ Traps –All versions 7771DS-HD-18 Revision 1.1...
Need help?
Do you have a question about the 7700 and is the answer not in the manual?
Questions and answers