7700 MultiFrame Manual
7700SID(-AM) Source Identification Decoder
5.7.7. Time Code Window V Position
WINDOWS
TC WIDNOW V
0 to 19
11
5.7.8. Status Window Enable
WINDOWS
STATUS
WINDOW
ENABLE,
DISABLE
5.7.9. Status Window H Position
WINDOWS
STATUS
WINDOW H
0 to 39
22
7700SID(-AM)-18
Starting row for the time code window.
This is the row of the time code display window counted from the top of
the screen.
When you select this parameter, the screen text will disappear and a box
of the correct size will appear. Move it around to the desired position with
the toggle switch. Press the push button when done.
On/ off control of the status window.
The status window can be turned on/off using this control.
Starting column for the status window.
This is the character position of the first character in the status display
window counted from the left side of the screen.
When you select this parameter, the screen text will disappear and a box
of the correct size will appear. Move it around to the desired position with
the toggle switch. Press the push button when done.
Warning, if you position the window near the audio bar graphs, you will
loose some text if you are in "TEXT" only mode (see "SDI Output" and
"Composite Output" above).
Revision 0.3