An Overview Of The Setup Menu System; Navigating The Setup Menu - evertz HD9626DSK Instruction Manual

High definition downstream keyer series

Hide thumbs Also See for HD9626DSK:

Table of Contents

HD9626DSK Instruction Manual

DSK LED:

When illuminated, this LED indicates that the unit is actively using the FILL Key and

Background video inputs. Flashing indicates the DSK is only on the preview output

4.2.

AN OVERVIEW OF THE SETUP MENU SYSTEM

The SETUP menu system uses the 16 digit alphanumeric display and provides a quick, intuitive method

of configuring the HD9626DSK Keyer. These items are often only required to be set up at installation

time, and do not pertain to the day-to-day operation of the unit. Figure 3-2 provides an overview of the

Setup menu system.

To enter the Setup menu, press the SETUP button. This will bring up the main Setup menu where the

user can use the SHAFT ENCODER to move up and down the list of available sub-menus. Top level

menu items are shown in UPPERCASE. Once you have chosen the desired sub-menu, press the

SELECT button to select the next menu level.

Once in a sub-menu, there may be another menu layer (shown in Title Case), or there may be a list of

parameters to adjust (shown in lower case). If there is another set of menu options, use the SHAFT

ENCODER to select the desired menu item and press the SELECT button. Continue this process until

you get to the bottom of the menu tree where the list of parameters to be adjusted is shown.

To adjust any parameter, use the SHAFT ENCODER to move up or down the parameter list to the

desired parameter. To view the possible values for that item, press the SELECT button. The current

value for that parameter will be shown with an asterisk (*). Turning one of the SHAFT ENCODERS

allows the user to show the possible values for the selected parameter. The various parameter values

that are not currently selected will NOT have an asterisk (*). Once the desired selection is found, press

the SELECT button to save the selection. The value will be shown with an asterisk (*) indicating that it

is now the current value. To move up one level in the menu, press the SETUP button.

The user can select other parameters from that sub-menu by using the SHAFT ENCODER, followed by

the SELECT button. Alternately the user can move up one menu item by pressing the SETUP button.

Once all the desired changes have been made, press the SETUP button one or more times until it

returns to the top of the Menu tree and exits the Setup menu.

Each of the menu items, with function explanations, is described in sections 3.5 to 3.9.

Page 4-6

Revision 1.4

DESKTOP CONTROL PANEL

Table of Contents