1. Manuals
  2. Brands
  3. evertz Manuals
  4. Network Hardware
  5. HD9626DSK
  6. Instruction manual

evertz HD9626DSK Instruction Manual

High definition downstream keyer
Hide thumbs Also See for HD9626DSK:
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2006
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive,
Burlington, Ontario, Canada
L7L 5Z9
Phone:
905-335-3700
Sales Fax:
905-335-3573
Support Fax:
905-335-0909
Internet:
Sales: sales@evertz.com
Tech Support: service@evertz.com
Web Page:
Version 1.0 March 2006
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 9625 Series Logo Inserters and Media Keyers. Evertz
Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the device.
All rights reserved. No part of this publication may be reproduced without the express written permission of
Evertz Microsystems Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz
Microsystems.
HD9626DSK
High Definition Downstream Keyer
Instruction Manual
Version 1.0, March 2006
http://www.evertz.com
HD9626DSK Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for evertz HD9626DSK

Summary of Contents for evertz HD9626DSK

  • Page 1 Version 1.0 March 2006 The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of purchasers of the 9625 Series Logo Inserters and Media Keyers. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the device.
  • Page 2 WARNING Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface...
  • Page 3 HD9626DSK Instruction Manual REVISION HISTORY REVISION DESCRIPTION DATE First revision Mar 06 Revision 1.0...

  • Page 5: Table Of Contents

    HD9626DSK Instruction Manual Table of Contents GETTING STARTED ........................1-1 1.1 OVERVIEW ......................... 1-1 1.2 GETTING HELP ......................1-1 1.3 FIRST TIME SETUP....................1-2 1.3.1 Rear Panel Hook Up ....................1-2 HD9625DSK HARDWARE ......................2-1 2.1 R ....................2-1 ANEL VERVIEW 2.2 GPI/O C .................
  • Page 6 HD9626DSK Instruction Manual This page left intentionally blank TABLE OF CONTENTS...

  • Page 7: Getting Started

    The system also features letter boxing, a safe area/safe title, wipes, fades and more. The Evertz HD9626DSK Downstream Keyer consists of a one RU frame with front panel control, optional remote control panel, and GPI control for stored pre-sets.

  • Page 8: First Time Setup

    DB9 connector labeled SERIAL CONTROL providing automatic control of the unit. The HD9626DSK has a universal power supply that operates on either 115 Volt / 60 Hz or 230 Volt / 50 Hz AC. The power supply auto switches between the voltages. A second redundant power supply purchase option operates in conjunction with the original power supply.

  • Page 9: Hd9625Dsk Hardware

    HD9626DSK Instruction Manual 2 HD9625DSK Hardware 2.1 REAR PANEL OVERVIEW Note: New pict here! HD9626DSK • SERIAL CONTROL is an RS-422 OR RS-232 serial interface used for controlling the unit through automation. Operational mode (422 or 232) can be set from the front panel. Pin out configurations are supplied later in the chapter.
  • Page 10 Serial component SMPTE 292M video required. • The HD9626DSK has a universal power supply that operates on either 115 Volt / 60 Hz or 230 Volt / 50 Hz AC. The power supply auto switches between the voltages. A second redundant power supply is optional and operates in conjunction with the original power supply.

  • Page 11: Gpi/O Circuitry And Operation

    2.2 GPI/O CIRCUITRY AND OPERATION The following drawing is a simplified schematic illustrating the General Purpose Inputs and Outputs. The HD9626DSK supports GPI input and output using the rear panel GPIO port high density DB-15 connector. The following diagram illustrates the connection: All GPI inputs are level triggered.
  • Page 12 HD9626DSK Instruction Manual HD9626DSK "GPIO" Pin-Out definition table. Name Description 1 GND Chassis ground 2 GPO2 General purpose output 3 GPO1 General purpose output 4 GPO3 General purpose output 5 GPIC General purpose input Load assigned preset 6 GPO4 General purpose output...

  • Page 13: Front Panel Controls Dsk

    HD9626DSK Instruction Manual 2.3 FRONT PANEL CONTROLS DSK Note: New pict here! HD9626DSK TRANSITION This button is used to transfer the PREVIEW BUS material to the PROGRAM BUS using the pre- configured transition type. For information on Transition Types refer to the "Transition" section of the "On Screen Menu"...
  • Page 14 HD9626DSK Instruction Manual SETUP Press the setup button to enter the setup menu. Options will be displayed on the front panel as well as On Screen of the PREVIEW OUT. Use the arrow buttons to cycle through the available setup options.

  • Page 15: Front Panel Indicators Dsk

    HD9626DSK Instruction Manual 2.4 FRONT PANEL INDICATORS DSK Note: New pict here! HD9626DSK MAIN DISPLAY This, sixteen character display is used to show menu items, setting values, mode selections etc. TRANSITION When illuminated, this LED indicates that a transition from the preview bus to the program bus is in progress.

  • Page 16: General

    HD9626DSK Instruction Manual PGM BUS LOCK Indicates that the panel is locked. In this state all front panel buttons are disabled except for the panel lock button. BYPASS Indicates that the unit is in bypass mode i.e. the program video is passing directly through the bypass...

  • Page 17: Matte

    HD9626DSK Instruction Manual This menu also contains options for displaying the Boot Code version. 2.6 MATTE The Matte is a black overlay that blacks out video and produces a letterbox effect for the output video. Use this control to set the aspect ratio of the video. The Matte starts at the end of the VBI.

  • Page 18: Transition

    HD9626DSK Instruction Manual 2.8 TRANSITION Transition Type: Select the type on transition you would like applied when the Transition button is pressed. Options are Cut, Fade, Fade-Cut, Fade-Fade, Cut-Fade, Diamond Out, Diamond In, Circle Out, Circle In, Box Out, Box In, TB Split, LR Split, TB Curtain, LR Curtain, TR Box, TL Box, BR Box, BL Box, Wipe 315, Wipe 270, Wipe 225, Wipe 180, Wipe 135, Wipe 90, Wipe 45 or Wipe 0.

  • Page 19: Preset

    HD9626DSK Instruction Manual 2.9 PRESET Presets are pre-defined setups for such things as Matte settings, Safe Area/Title display, Transition settings and Key/Fill input. The parameters for the settings are stored based on the status of the program bus. Therefore if you would like to set a preset that has a mask aspect of 2.35, you must first set the mask.
  • Page 20 HD9626DSK Instruction Manual Select prog A to activate the output when the program output bus input is BKG/A. Select prog B to activate the output when the program output bus input is FILL/B. Select prog BBLK to activate the output when the program output bus input is the internal black generator.

  • Page 21: Firmware Update Procedure

    • New firmware supplied by Evertz. Note: 1. Firmware downloaded from the FTP section on the Evertz web page (www.evertz.com) it is stored in compressed form in a zip file. If the file extension is “*.exe” you must first run the self extracting zip file to extract the “*.bin”...

  • Page 22: Part Ii - Invoke Upload Mode Via The Front Panel

    3.2.3 Part III – Invoke upload mode via the terminal program 5. A banner with the boot code version information should appear in the terminal window. For example: EVERTZ 7700 MONITOR 1.0 Feb 2001 COPYRIGHT 2001 EVERTZ MICROSYSTEMS LTD. 9000DP COLD BOOT> | 6.

  • Page 23: Part Iv - Uploading The New Firmware

    HD9626DSK Instruction Manual 8. While the cursor is spinning press the <CTRL> and <X> keys, this should stop the cursor from spinning. If the Evertz frame continues to boot-up simply cycle the power on the Evertz frame and repeat this step.
  • Page 24 HD9626DSK Instruction Manual The update procedure is now completed. Firmware Update Procedure Revision 1.0 Page 3-4...

  • Page 25: Dcp Addendum

    4 DCP ADDENDUM 4.1 OVERVIEW The Evertz 9625 Downstream Keyer Desktop Control Panel (DCP) is a remote setup and control hardware interface for the Evertz 96xxDSK products. This addendum document is an accompaniment to the main manual and should be used to reference the buttons and control interface. This addendum replaces the front panel section 2.3 of the main manual.
  • Page 26 HD9626DSK Instruction Manual Pin # HD9626DS Connect Status Remote Panel Pin # RS422 Shielded cable DB-9 Female DB-9 Male Belden 9729 1 GND Chassis ground 2 TX- RS-422 pin 3 RX+ RS-422 pin 4 GND Ground 6 GND Ground 7 TX+...
  • Page 27 HD9626DSK Instruction Manual DCP Addendum Revision 1.0 Page 4-3...

  • Page 28: Dcp Panel Button Description

    HD9626DSK Instruction Manual Order Information Cable: WA-T51 Description: 50 Foot External Extender Cable for 9000 series RCP/DCP. Cable: WA-T52 Description: 170 Foot External Extender Cable for 9000 series RCP/DCP. Cable: WA-T53 Description: 200 Foot External Extender Cable for 9000 series RCP/DCP.
  • Page 29 HD9626DSK Instruction Manual The Shaft Encoders functions as a replacement for the up and down arrow keys described in the main DSK manual. This control knob is used to increment and decrement the values selected in the menu system. You can use the shaft encoder to adjust the values, or to change the current selection in the setup menus.
  • Page 30 HD9626DSK Instruction Manual menu system and then using the shaft encoders to select the Gain option from the DSK sub menu. After pressing the gain you may adjust the range of values from 500 to 2000 (per thousand). This setting increase or decreases the entire range of color with respect to the key input. This will render the fill as more or less pronounced respectively.
  • Page 31 HD9626DSK Instruction Manual FILL This button sets the output bus to display the video from the Fill/B input. Button LED states as per the BKG button description. This button sets the output bus to display the video from the BKND/A input, mixed with the video from the Fill/B input, based on the settings from the Key setup menu.
  • Page 32 HD9626DSK Instruction Manual TAKE When illuminated, this LED indicates that a transition from the preview bus to the program bus is in progress. Transitions are configured from the on screen menus and buttons described earlier. This button is used to transfer the PREVIEW BUS material to the PROGRAM BUS using the pre-configured transition type.

  • Page 33: Firmware Update Procedure

    New firmware supplied by Evertz. Note: Firmware downloaded from the FTP section on the Evertz web page (www.evertz.com) it is stored in compressed form in a zip file. If the file extension is “*.exe” you must first run the self extracting zip file to extract the “*.bin”...

  • Page 34: Part Ii - Invoke Upload Mode Via The Front Panel

    A banner with the boot code version information should appear in the terminal window. For example: EVERTZ 7700FC BOOT MONITOR. MON8240 1.1 BUILD 9. COPYRIGHT 2000 EVERTZ MICROSYSTEMS LTD. ALL RIGHTS RESERVED. UPLOAD MAIN PROGRAM 15. The following is a list of possible reasons for failed communications: Defective RS-232 “straight-thru” serial extension cable.

  • Page 35: Part Iv - Uploading The New Firmware

    The cursor under the line “Upload main program” should be replicating across the screen. While the cursor is replicating press the <CTRL> and <X> keys, this should stop the cursor from replicating. If the Evertz frame continues to boot-up simply cycle the power on the Evertz frame and repeat this step.
  • Page 36 HD9626DSK Instruction Manual 20. Power-down the Evertz frame. 21. Power-up the Evertz frame. You can now close the terminal program and disconnect the RS-232 serial cable. The update procedure is now completed. Firmware Update Procedure Revision 1.0 Page 5-4...
  • Page 37 HD9626DSK Instruction Manual Index Invoke upload mode via the terminal program....4-2 ARROWS..............2-5 Main Display ..............2-7 Matte ................3-2 Bypass ..............2-6, 2-8 On Screen Menu............3-1 Overview ...............1-1 COMM ................2-7 PGM Bus Lock..............2-8 DCP ................1-2 DSK............... 2-7, 3-2 POWER SUPPLY ............2-2 Preset ................3-4 Preview Bus ............
  • Page 38 HD9626DSK Instruction Manual This page let intentionally blank Index Revision 1.0 Page ii...

Table of Contents