5.
TECHNICAL DESCRIPTION
5.1.
SPECIFICATIONS
5.1.1. Video Specifications
5.1.1.1.
HD Serial Digital Video Input
Standard:
Number of Inputs:
Connector:
Equalization:
Impedance:
Return Loss:
5.1.1.2.
HD Serial Digital Video Outputs
Standard:
Number of Outputs:
Connectors:
Signal Level:
DC Offset:
Rise and Fall Time:
Overshoot:
Wide Band Jitter:
Impedance:
5.1.1.3.
Serial Remote Control
Serial Control:
Upgrade Port:
COM D Port:
Remote Panel Port:
5.1.2. Control
Logo Transfers:
TECHNICAL DESCRIPTION
1.485 Gb/sec HD Serial component digital SMPTE 292M
standards supported shown in Table 2-6 - software selectable
SMTPE 292M 1.485Gb/s, 1080i/60, 1080i/59.94, 1080/50, 1080p/24(sF),
1080p/23.98 (sF), 720p/60, 720p/59.94
4 (A, B, Key and Fill)
BNC per IEC 61169-8 Annex A.
Automatic 100m @ 1.5Gb/s with Belden 1694 or equivalent cable
75 ohm
> 15 dB up to 1.5Gb/s Mb/s
SMPTE 292M, same as input
1 Program, 1 preview
BNC per IEC 61169-8 Annex A.
800mV nominal
0V ±0.5V
200ps nominal
<10% of amplitude
< 0.2 UI
75 ohm
RS-232/422, 8 bits, no parity, 9600, 19200, 38400, 57600 baud, computer
control of all functions
9 pin female "D", RS-232 57600 baud, 8 bits, no parity for firmware upgrade
9 pin female "D", RS-232/422 8 bits, no parity, baud rate depends on
protocol.
Selectable protocols: Automation, EAS Interface, temperature probe
interface.
9 pin female "D", RS-422 9600 baud, 8 bits, no parity
Rack mount control panel interface
RJ-45 100Base T Ethernet, TCP/IP
Revision 1.4
HD9626DSK Instruction Manual
Page 5-1